Chimney repair in Indio CA - a sound chimney that keeps water out of your house
Water stain by the chimney or loose bricks up top? We find where the water's getting in and fix that, so the chimney stays sound.
- Licensed and insured.
- Free quotes on site.
- Expect a reply within 1 business day.
What does chimney repair in Indio involve?
Chimney repair in Indio means fixing missing, loose or cracked brick and mortar joints and sealing the roof joint and the crown, so you end up with a sound chimney that keeps water out of your house.
Most people call us after they find a stain on the ceiling or wall beside the chimney, or notice a few loose bricks near the top, and they want to know how big the job really is. The price turns on what's actually letting the water in, how much flashing, crown or mortar needs work, and how easy the chimney is to reach on your roof, while the schedule turns on that same scope and on whether a new liner is planned afterward. The estimate I write after looking at your chimney gives you the figure for your own job.
How we handle chimney repair
A leak by a chimney often starts at the flashing or the crown, so I check those first, before anyone touches the brick. Flashing is the metal that seals the joint where your roof meets the chimney, and the crown is the cap on top that sheds water away from the flue. Once we know the source, our crew repairs that first, then repoints cracked joints and resets or replaces loose and missing brick. I'd rather find the real source than patch brick that isn't the problem, because a patch in the wrong spot leaves you with the same stain after the next storm.
Chimney work often runs into the rest of your masonry. When the mortar is worn on more than the chimney, tuckpointing cuts out the old joints and refills them with fresh mortar matched to the old, and when bricks are cracked or flaking on a wall or step as well, our brick repair work replaces just those pieces so they blend in.
Flashing and crown repair
This suits you if the stain shows up after rain on the ceiling or wall right beside the chimney, because that usually means water is getting past the roof joint or the top. Fixing it there stops the leak where it starts.
Mortar joint and brick repair
This suits a chimney with cracked joints, loose bricks or missing pieces, where the masonry itself has started to let go. We match the new mortar to the old so the repair blends in with the rest of the chimney.
If water is already showing up inside near the chimney, please call (760) 262-2338 rather than waiting, because a small leak at the flashing usually gets worse with each storm.
What happens after you call us about your chimney in Indio?
Here's how a chimney job runs with us, from your first call to the walk-through at the end, and who you'll be dealing with at each step along the way.
Call or send the form
You call (760) 262-2338 or send the form, and we get back to you to set up a visit. Thank you for taking the time to reach out.
I look at your chimney
I come out myself, look at the flashing, crown and joints, and ask a few questions about when the water shows up. You get an estimate that says what needs fixing and what doesn't, so you know your figure before any work starts.
Our crew does the repair
When you're ready, our own crew does the work, starting with whatever is letting the water in. We fix the source first and then the masonry around it.
We review and clean up
I go over the finished work with you before we call the job done. We clean up before we leave, so the roof and yard look the way we found them.
Get an on-site estimate for your chimney repair
Send the form and we'll reply within one business day to set up a visit. I'll look at your chimney and give you a free estimate on site, with no obligation and no pressure to book.
(760) 262-2338Chimney repair in Indio and who can do the work
California's exemption for minor work stops at $1,000, and it only applies when the job needs no permit and the unlicensed person employs no one, so chimney work outside that calls for a licensed contractor. We're licensed and insured. The state's masonry contractor class is the one that covers brick, natural and manufactured stone, terra cotta and fire brick for refractory work, which are the materials most chimneys are built from, so it's worth asking any contractor you're considering how they're licensed.
Industry guidance recommends a Level 2 inspection after an earthquake, so if a quake shakes your house, plan to have the chimney looked at. We're based in Indio and work in the cities around it across the valley, and we bring the same care to chimney jobs in Palm Desert and La Quinta. We're glad to hear about a job a little farther out, too.
Chimney repair questions from Indio homeowners
How much does chimney repair cost in Indio?
Across the US, chimney cap and crown repair with waterproofing, or a stainless reline, usually costs about $550 to $3,600 per job. That's the market's usual range, not our price, and where your chimney falls depends on what's letting water in and how much of the masonry needs work. I'll give you the figure for your own chimney when I come out, and our promise is satisfaction guaranteed on every job.
What causes a chimney to leak into the house?
Most chimney leaks come from the joint where the roof meets the chimney, which has to be properly flashed with base and counter flashing to keep water out. Base flashing sits on the roof against the chimney, and counter flashing is set into the brick and laps down over it so water can't get behind. The area around the crown is often overlooked too, and when its flashing and sealants fail, water gets into the space between the chimney wall and the flue liner.
When do I need a Level 2 chimney inspection?
Industry guidance recommends a Level 2 inspection when a home is being sold, before a chimney is lined or relined, and after a chimney fire or a weather event, along with the earthquake case mentioned above. It covers the roof and any attic, basement or crawl space that can be reached, plus a required video scan inside the chimney. That way you see the full scope before you pay for repairs.
What are the signs my chimney needs repair?
Water showing up inside near the chimney is the clearest sign, and inspectors also note staining at the shoulder, where the chimney narrows partway up, as a possible sign of water getting in. In the attic, water damage just below the flashing is worth looking for, and if you've had an inspection, you can ask what turned up there. Any of these is a good reason to book a look before the next storm.
Do I have to repair my chimney before putting in a new liner?
Yes, if the masonry or mortar joints are missing, loose or cracked, because one liner maker's instructions require those repairs before the liner goes in. If you're planning a new liner and the chimney's structure is in question, expect masonry repair to be part of the plan, and I'll tell you at the estimate whether yours needs it.
How do I get my house ready for chimney liner work?
Move or cover the furniture and rugs near the fireplace, because one liner maker's guide notes that chimneys are usually very sooty and dusty during cleaning and liner work. If we're working on your chimney, we'll go over what to clear when I come out for the estimate.
Other masonry work that goes with chimney repair
If the mortar between your bricks is sandy, recessed or cracking on a wall or chimney face, fresh joints keep water out and help the brick last.
When single bricks are cracked, flaking or loose on a wall, step or planter, we replace just those and match them so the patch doesn't stand out.
Tell us where your chimney is leaking
Call (760) 262-2338 any day of the week or use the form, and mention where the water shows up, any stains you've seen and whether a quake shook the house lately, so I know where to look first.